Note:

1.One host can be equipped with 8PCS remote controls.
2. Before the first use, please charge it first, and then it can be used normally after activation. It is recommended to use it again after it is fully charged.
3.If you are worried about not knowing how to use the product, you can contact us and we will send you the document of the product manual by email. You can copy the text and translate it into the language you want.

Feature :

● Taillight/Brake light/Anti-theft alarm/Bike bell 4-in-1 function!
● Reminding the surrounding pedestrians and drivers with light and sound warning, effectively protect the safety of        the car and the rider!
● Warning light will automatically light up when passing through a tunnel or during the night rides!
● Brake light will, be highlighted immediately when you brake or slow down!
● Arming when parking, deterring thieves and protect your car effectively by loud alarm sound and blink light!
● PC+ anti-UV material, waterproof and dustproof, high and low temperature resistance, not afraid of wind, rain and      severe cold and heat!

Product Parameter:

1. Working Frequency: 433.92MHz
2 .Storage Temperature: -40 ~ +70 ℃
3. Working Environment Humidity: <80%
4. Working Environment Temperature: -40 ~ +70℃
5. Alarm Charge Port: Standard USB-C 5V (some quick chargers may not be compatible)
6 .Alarm Battery : 4.2V 700mAh lithium battery, working time about 1-3 months, standby time about 6 months.
7. Remote Battery:
WLO3C: 27A(12V) Alkaline battery, working time about 1-2 years (5 times per day) .
WLO9C: CR2032(3V) Button battery, working time about 2-4 years (5 tímes per day).

Low Battery Warning & Charging:

1. Check whether the remote control indicator can light up. If not or light weak, please replace the remote control battery.

2. The alarm is in low power consumption mode when you receive. In this mode, remote can not control the alarm. Please charge the alarm at least 1 minute to activate before use, otherwise remote can't control the alarm.

3.If alarm have been charged and activated, remote still doesn' t work, please pair the remote and alarm again. The pairing method please see.